03-07 Ford 6.0 Complete EGR Delete with STC Upgrade and SCT 7015 X4 Tuner

Be the first to review this product

Availability: In stock

FDD1-SCT-STC
$679.99
ORR

Quick Overview

03-07 Ford 6.0 Complete EGR Delete with STC Upgrade and SCT 7015 X4 Tuner

Details

Do you want an affordable, leak proof EGR Delete Kit? This EGR Delete kit is for the Ford 2003 through 2007 6.0 liter Powerstroke diesel engine and fits the F-250, F-350, F-450, F-550 as well as the Econoline and Excursion models.

CNC machined on American made Haas machining center!
Uncoated aluminum 6061 manifold and J-Tube!
100% made here in the USA
Free Shipping
Tube is pulse welded into aluminum manifold for a leak free connection
Each piece is leak tested
One piece construction for ease of installation
O-ringed for leak free installation
304 Stainless steel up-pipe with pulse welded flanges mandrel bent for smooth flowing exhaust
Mandrel bent tubing on automated tube bending equipment American made Pines mandrel tube bending machines
Completely replaces egr valve and egr cooler
Coolant is re-routed back to the motor, not just blocked off.
Lower coolant temperatures
Stops soot buildup
Does not included intake gaskets

This kit is intended for off road use, Please check your state laws before installing kit.
DOES NOT REQUIRE THE REMOVAL OF THE INTAKE MANIFOLD OR CAB
The EGR system operates by taking some of the exhaust gases and sends it back into the motor. The hot exhaust gases are cooled by your engine cooling system. The problem is that the coolant is heated up by trying to cool the hot exhaust. This makes your engine operate at a higher temperature. By eliminating the EGR and Cooler you are sending all your exhaust gases thru the turbo and your coolant is now able to do the job it was intended for, cooling the engine. Removing the EGR valve eliminates the chance of any blockages in the system. Removing the EGR valve may set off a check engine light. You will need to run a tuner to turn off the EGR system to eliminate the code/light.

STC HPOP Fitting Update Kit

The Ford 6.0 STC HPOP Fitting Update Kit is a New One-Piece High Pressure Oil Connector

The installation of the Ford 6.0 STC HPOP Fitting Update Kit is highly recommended when you're replacing your EGR cooler, installing a EGR delete or oil cooler.

It is very highly recommended that you install the Ford 6.0 STC HPOP Fitting Update Kit anytime the pump is exposed during repairs.

By installing this Ford 6.0 STC HPOP Fitting Update Kit kit will restore engine reliability and customer satisfaction by eliminating repeat failures.

This Ford 6.0 STC HPOP Fitting Update Kit STC is a recommended update for all Powerstroke 2004 to 2007 6.0L Powerstrokes.

The old style fiiting were prone to leaking causing hard start, low HPOP pressures and stalling when engine reaches normal operating temperature. These know issues are eliminated with the installation of the Ford 6.0 STC HPOP Fitting Update Kit.

The Ford 6.0 STC HPOP Fitting Update Kit contains the new bracket in a kit as shown above.

The Ford 6.0 STC HPOP Fitting Update Kit was the redesign of the high pressure oil pump for 2005 and newer Power Stroke diesel engines the "snap-to-connect" or STC fitting used to connect the high pressure oil pump to the oil supply branch tube has been problematic. The two piece fittings have a tendency to flex causing wear on the seal and the locking ring resulting in leaks and occasionally the complete separation of the fitting. When a leak occurs at this fitting, the engine may be difficult to start or may not start at all. Depending on the severity of the leak the engine may stall, sometimes abruptly and without warning.

The Ford 6.0 STC HPOP Fitting Update Kit works on the following affected engines:

International VT-275,
International VT-375
Ford 4.5L Power Stroke
Ford 6.0L Power Stroke diesel engines.

This new Ford 6.0 STC HPOP Fitting Update Kit bracket is designed to support the fitting and branch tube and eliminate the possibility of the fitting to become separated.

The Ford 6.0 STC HPOP Fitting Update Kit contains:

1 Support Bracket
1 Hydraulic Pump Seal Kit
1 Branch Tube Adapter - Male
1 HPOP Adapter Fitting - Female
2 M6 X 35 mm Branch Tube Bolts
2 M8 X 60 mm Pump Bolts
1 M8 X 45 mm Pump Bolt
All new for 2013 SCT 7015 Wi-Fi Tuner/Programmer

SCT 7015 X4 Ford tuner
-Built-In Wifi For Easy Updates: Built-in WIFI  connectivity attaches to your local wireless network for easy device  updates. 
-Full Color LCD Display: Full color LCD screen with auto dim  feature and user adjustable portrait/landscape modes. 
-Holds 10 Custom  Tunes:
- Monitor your vehicle's PCM data live in real-time on screen or  using SCT's LiveLink Data Loggin Software. 
- Compact Design: Styled  after our popular X3 programmer, the new X4 is smaller and more compact.  (2.75" wide x 5.5" high) Features: Full Color LCD Screen Smaller, Compact  Design Logging & Monitoring Capabilities

Additional Information

bestsellers No
Brand No

Write Your Own Review

You're reviewing: 03-07 Ford 6.0 Complete EGR Delete with STC Upgrade and SCT 7015 X4 Tuner

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality
Get Discount!
Share